Configure your Sharp OSA 4.0 MFP

Back to knowledge base

Sharp MFP devices are easily configured to interface with Udocx.  This article will guide you through the prerequisites for setting up your Sharp MFP device and the configuration within the Udocx Admin Portal.  This procedure is required once per device.

Sharp MFPs use the Open System Architecture (OSA) to connect to Udocx.  Currently, there are three OSA versions on the market (5.0, 4.0, and 3.5).  Depending on the OSA version, different steps must be followed to configure the device to use Udocx.  This article describes the steps for configuring an OSA 4.0 MFP.  For configuring OSA 5.0 devices see: Configure your Sharp OSA 5.0 MFP, and for configuring OSA 3.5 devices see: Configure your Sharp OSA 3.5 MFP.

NOTE: It is recommended to check with your Sharp dealer which OSA version is running on the device and if it requires software update.

NOTE: If your Sharp OSA 4.0 MFP cannot connect directly to the Internet, see: Configure Your Service Proxy.

Steps

1.Confirm that your Sharp MFP device can access the Internet.  Attach a laptop to the network cable used by the device and ensure that you can access https://mfp.udocx.com and other websites like http://www.google.com.  If you are unable to access the Internet, you will need to resolve the issue before proceeding with the Udocx configuration.

2.Open a web browser and enter the IP address of your Sharp MFP

3.Write down the device serial number

4.Login as the administrator, go to "Application Settings" > "External Application Settings" > "Standard Applications Settings"

5.Click [Add(Y)] button to add the Udocx application

6.Fill in Udocx as application name, https://mfp.udocx.com/ as the address for the application UI, enable the option “Extended Platform”, and set the display size to "full".  Click [Submit(U)].

7.The Udocx application is shown as “Standard Application”.  Go to the MFP, select OSA and press the newly created Udocx button.  You are now taken to the login screen, with the message "Sorry, this machine does not have permission to use this service.  Please contact your administrator".  This indicates that your MFP has successfully connected to the Udocx service, but the serial number of the device is not yet registered in the Udocx portal

8.Login to your Udocx admin account in the Udocx administrator portal

Login to the Udocx administrator portal

9.Go to [MFPs] and select [Add new MFP]

10.On the “General” tab fill in:

  • Status = Enabled
  • Name = Friendly name of this MFP
  • Serial number = serial number of the MFP found via the MFP configuration
  • Manufacturer = Sharp
  • Email suffix = your email domain (this can be left empty for now)
  • Account suffix = your UPN domain when UPN is different from email domain (this can also be left empty for now)

 

Click [Save] to store this MFP configuration.

11.Go to the MFP, select OSA and press the Udocx button. When the “Login to Udocx” window appears on your MFP display you successfully connected your device to Udocx.

Now you're all set to configure your Udocx Applications to interface with services such as Microsoft Office 365, Google Drive, and Dropbox.  See the How to Create Apps for more information.

 

 

This answer was helpful This answer wasn't helpful
Thank you for taking the time to give feedback.
Don't let one unhelpful article stop you. Send us a message or try searching our knowledge base to find what you are looking for.